CTS V6-3.2L VIN N (2003)
Fluid - M/T: Service and Repair
Transmission Fluid Replacement
Draining Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Clean away all dirt and debris from the transmission fluid drain plug area.
3. Remove the transmission fluid drain plug.
4. Allow the transmission fluid to drain into an appropriate container for proper disposal.
Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
5. Install the transmission fluid drain plug.
Tighten the plug to 35 Nm (26 ft. lbs.).
Filling Procedure
1. Clean away all dirt and debris from the transmission fluid fill plug area.