CTS V6-3.2L VIN N (2003)
6. Drain the solvent from the washer solvent container.
7. Disconnect the washer hose (9) from the washer pump (8).
8. Disengage the electrical harness retainer clip (5) from the washer solvent container (7).
9. Disconnect the electrical connector from the washer pump.
10. Disconnect the electrical connector from the washer solvent level sensor.
11. Remove the fasteners (1,4,10) from the washer solvent container.
12. Loosen the clinch nut (3) from the horizontal bracket to the body rail.
13. Disconnect the headlamp washer solvent hose from the washer pump.
14. Carefully lift the washer solvent container from the key hole slot (1) in the body rail.
15. Guide the fill neck down through the radiator support.
16. Remove the washer solvent container from the vehicle.
