CTS V6-3.2L VIN N (2003)
1. Install the new washer solvent level sensor switch grommet (3) into the container.
2. Install the washer solvent level sensor switch (1) into the washer solvent container.
3. Apply equal inward pressure in order to seat the level sensor switch to the grommet.
IMPORTANT: The square side (2) of the level sensor switch must point upward upon installation.
4. Connect the electrical connector (4) to the washer solvent level sensor switch.
5. Install the lower air deflector.
6. Fill the washer solvent container with washer solvent.