CTS V8-5.7L VIN P (2004)
![background image](/cadillac/cts/v8-5.7l_vin_p/Page-2684002.png)
1. When replacing the VCIM, record the 11-digit electronic serial number (ESN) and the 10-digit station identification (STID) number from the label
on the new VCIM.
2. Reconnect the electrical connectors the module.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the module onto the vehicle.
Tighten
Tighten the nuts to 9 N.m (80 lb in).
IMPORTANT: After replacing the VCIM, you must reconfigure the OnStar(R) system. Failure to reconfigure the system will result in an additional
customer visit for repair. In addition, pressing and holding the white dot button on the keypad will NOT reset this version of the OnStar(R) system.
This action will cause a DTC to set.
4. Reconfigure the OnStar(R) system. Refer to OnStar Reconfiguration. See: Testing and Inspection/Programming and Relearning