CTS V8-5.7L VIN P (2004)
Front Door Striker: Service and Repair
Door Striker Replacement
Removal Procedure
Important: Observe the striker location before removing the striker screws.
1. Remove the door striker screws.
2. Remove the striker.
Installation Procedure
1. Assemble the striker. Position the striker on the lock pillar with the narrow part of the striker facing outwards.
2. Secure the striker screws.
3. Align the door striker. Refer toDoor Lock Striker Adjustment (See: Rear Door/Rear Door Striker/Adjustments) .
Notice: Refer toFastener Notice in Cautions and Notices.
4. Tighten the striker screws.
Tighten the striker screws to 27.5 Nm (20 lb ft).