CTS V8-5.7L VIN P (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Sealing Strip
Rear Door Window Belt Inner Sealing Strip Replacement
Rear Side Door Window Inner Sealing Strip Replacement
Removal Procedure
1. Lower the window to the full down position.
2. Remove the door trim panel. Refer toRear Side Door Trim Panel Replacement See: Rear Door Panel/Service and Repair
3. Starting at the forward end of the inner belt sealing strip, pull upward to release the strip.
Installation Procedure
Important: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the
splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back together.
1. Work from one end of the sealing strip to the other.
2. Position the inner belt sealing strip over the flange of the door inner panel.
Important: Do not distort the seal strip.
3. Adjust seal strip gap (a) at the division post to 1.0 mm (0.04 in) maximum.
4. Press downward to engage the sealing strip the entire length of the door.
5. Install the door trim panel. Refer toRear Side Door Trim Panel Replacement See: Rear Door Panel/Service and Repair
Rear Door Window Belt Outer Sealing Strip Replacement
Rear Side Door Window Outer Sealing Strip Replacement
Removal Procedure