CTS V8-5.7L VIN P (2004)
Rear Door Window Motor: Service and Repair
WINDOW REGULATOR MOTOR REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
IMPORTANT: There is a binding effect on the power window motor drive when the window is in the fully closed or open position.
3. Partially open the window, if possible.
4. Remove the window regulator.
5. Remove the screws securing the power window motor to the window regulator.
6. Twist the power window motor clockwise to remove the motor from the regulator.
INSTALLATION PROCEDURE