CTS V8-5.7L VIN P (2004)
![background image](/cadillac/cts/v8-5.7l_vin_p/Page-3255001.png)
Hood Hinge: Service and Repair
Hood Hinge Replacement
Removal Procedure
1. Open and support the hood.
2. Using a wax pencil, scribe the location of the hood hinge on the hood.
3. Apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
4. Remove the hood. Refer toHood Replacement (See: Service and Repair) .
5. Remove the fender. Refer toFront Fender Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair/Front Fender
Replacement) .
6. Remove the bolts (1) that secure the hinge to the motor compartment.
7. Remove the hinge from the vehicle.
Installation Procedure
1. Install the hinge to the vehicle.
Notice: Refer toFastener Notice .
2. Install the bolts (1) in order to secure the hinge to the motor compartment.
Tighten the fasteners to 24 Nm (18 lb ft).
3. Install the hood using the marks scribed during removal. Refer toHood Replacement (See: Service and Repair) .
4. Install the fender. Refer toFront Fender Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair/Front Fender
Replacement) .
5. Close the hood and inspect for fit.
6. Adjust the hood as necessary. Refer toHood Adjustment (See: Adjustments) .
7. Remove the tape from the panels.