CTS V8-5.7L VIN P (2004)
4. Install the bolts (1) in order to secure the lower rear portion of the front fender to the vehicle.
Tighten the bolts to 9 Nm (80 lb in).
5. Install the bolts (1) in order to secure the lower front portion of the front fender to the vehicle.
Tighten the bolt to 9 Nm (80 lb in).
6. Install the hood. Refer toHood Replacement (See: Doors, Hood and Trunk/Hood/Service and Repair) .
7. Install the front wheelhouse liner. Refer toFront Wheelhouse Liner Replacement (See: Front Wheelhouse Liner Replacement) .
8. Install the rocker panel molding. Refer toRocker Panel Molding Replacement (CTS) ()Rocker Panel Molding Replacement (CTS-V) () in
Exterior Trim.
9. Install the headlamp. Refer toHeadlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in
Exterior Lighting.
10. Remove the tape from the corners of the panels and adjacent surfaces.