CTS V8-5.7L VIN P (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Body Side Rear Upper
GARNISH MOLDING REPLACEMENT - BODY SIDE REAR UPPER
REMOVAL PROCEDURE
TOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
1. Remove the rear seat back.
2. Remove the rear sail panels.
3. Remove the rear carpet retainers (1).
4. Using the J 38778 disengage the push-in retainers from the upper garnish molding.
5. Remove the body pillar upper garnish molding by pulling the panel from the locator holes.
6. Remove the garnish molding.
7. Transfer the shoulder belt comfort guide to the new garnish molding, if replacing.
INSTALLATION PROCEDURE