CTS V8-5.7L VIN P (2004)
Power Mirror Motor: Service and Repair
MOTOR REPLACEMENT - POWER MIRROR
REMOVAL PROCEDURE
1. Remove the mirror face.
2. Remove the screws (2).
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Align the motor to the mirror assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screws (2).
Tighten
Tighten the screws (2) to 1 N.m(9 lb in).
4. Install the mirror face.