CTS V8-5.7L VIN P (2004)
Power Seat Motor Position Sensor: Procedures
Power Recliner Sensor Replacement - Front
POWER RECLINER SENSOR REPLACEMENT - FRONT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Remove the front seat.
2. Disconnect the electrical connector from the sensor (2).
3. Rotate the sensor counterclockwise and remove it (1).
INSTALLATION PROCEDURE
1. Install the sensor (1) in the motor and rotate it clockwise until it locks in to place.
2. Connect the electrical connector (2) to the sensor.
Sensor Replacement - Seat Adjuster Motor - Vertical
SENSOR REPLACEMENT - SEAT ADJUSTER MOTOR - VERTICAL
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or to SIR Disabling and Enabling Zone 9 in Restraint Systems.
2. Remove the seat.