CTS V8-5.7L VIN P (2004)
![background image](/cadillac/cts/v8-5.7l_vin_p/Page-3655001.png)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Sealing Strip
Front Side Door Window Belt Inner Sealing Strip Replacement
Front Side Door Window Belt Inner Sealing Strip Replacement
Removal Procedure
1. Lower the window to the full down position.
2. Remove the door trim panel. Refer toFront Side Door Trim Panel Replacement See: Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair
3. Starting at one end of the window inner belt sealing strip, pull upward to release the strip.
Installation Procedure
Important: When reusing the inner belt sealing strip, the flange mounting area must be pinched together in order to counteract the
splaying effect when removed. Use a thumb and an index finger to pinch the carrier (3) back together.
1. Work from one end of the sealing strip to the other.
2. Position the inner belt sealing strip over the flange on the door inner panel.
Important: Do not distort the sealing strip.
3. Press downward to engage the sealing strip the entire length of the door.
4. Install the door trim panel. Refer toFront Side Door Trim Panel Replacement See: Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair
Front Side Door Window Belt Outer Sealing Strip Replacement
Front Side Door Window Belt Outer Sealing Strip Replacement
Removal Procedure