CTS V8-5.7L VIN P (2004)
8. Rotate the EBCM connector tab (2) up to the unlocked position.
9. Notice: To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the
ON position.
Disconnect the EBCM electrical connector (1) from the EBCM (3) and position out of the way.
10. Remove the 2 BPMV bracket nuts (2).
11. Remove the EBCM/BPMV assembly (1) from the BPMV bracket.
12. Remove and discard the 4 EBCM to BPMV screws.
13. Clean the surface of the EBCM/BPMV assembly.
14. Remove the EBCM (1) from the BPMV (2).
Installation Procedure