CTS V8-5.7L VIN P (2004)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement
Intermediate
Park Brake Cable Replacement - Intermediate
^
Tools Required
-
J 37043 Parking Brake Cable Release Tool
Removal Procedure
1. Ensure that the park brake is fully released.
2. Raise the vehicle and support.
3. Pull down on the intermediate park brake cable (2) near the park brake connector (1).
4. Remove the intermediate park brake cable (2) from the park brake cable connector (1).
5. Use the J 37043 in order to depress the locking retainer (2) of the intermediate park brake cable housing (1).
6. Remove the intermediate park brake cable from the floor pan bracket (3).
7. Remove the park brake cable guide nut (3) from the mounting stud.
8. Remove the park brake cable guide bolt (1) from the floor pan.
9. Remove the park cable guides (2).
10. Disconnect the intermediate cable (2) from the rear equalizer (3).
11. Disconnect the intermediate cable (2) from the right rear park brake cable connector (1).