CTS V8-5.7L VIN P (2004)
2. Install the park brake release cable housing (2) to the park brake pedal assembly (1).
3. Install the park brake pedal and front park brake cable assembly (3) to the mounting bracket.
4. Install the park brake pedal assembly attaching nuts (1, 2).
1. Tighten the park brake pedal assembly mounting nuts (2) to 25 Nm (18 ft. lbs.).
2. Tighten the park brake cross stud mounting nut (1) to 10 Nm (88 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the grommet to the floor pan.
6. Connect the electrical connector to the park brake warning lamp switch.
7. Reposition the carpet.
8. Install the left front carpet retainer.