CTS V8-5.7L VIN P (2004)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the upper condenser mounting bolts (1).
Tighten the bolts to 6.5 Nm (58 inch lbs.).
3. Raise the vehicle.
4. Install the lower condenser mounting bolts (1).
Tighten the bolts to 6.5 Nm (58 inch lbs.).
5. Push the lower transaxle oil cooler lines into the radiator until you hear the lines engage.
6. Gently tug out on the oil cooler lines to verify that the lines are engaged into position.