CTS V8-5.7L VIN P (2004)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the auxiliary cooling fan lower bolts (1,2).
Tighten the bolts to 6.5 Nm (58 inch lbs.).
3. Install the fan assembly bolt (1).
Tighten the bolt to 6.5 Nm (58 inch lbs.).
4. Install the remaining auxiliary cooling fan bolts.
Tighten the bolts to 6.5 Nm (58 inch lbs.).
5. Push the auxiliary transaxle oil cooler line into the cooler until you hear it engage.
6. Gently tug out on the transmission oil cooler line to verify that the line is engaged into position.
7. Connect the auxiliary fan electrical connector.
8. Install the air deflector.
9. Inspect the transmission fluid level.