CTS V8-5.7L VIN P (2004)
16. Loosen the valve rocker arm cover bolts.
17. Remove the valve rocker cover.
18. Remove the gasket (1) from the rocker cover. Discard the OLD gasket.
19. Clean and inspect the rocker arm cover.
Installation Procedure
Important:
^
All gasket surfaces should be free of oil and other foreign material during assembly.
^
DO NOT reuse the valve rocker arm cover gasket.
^
The valve rocker arm cover bolt grommets may be reused.
1. Install a NEW rocker cover gasket (1) into the valve rocker cover lip.