CTS V8-5.7L VIN P (2004)
9. Connect the EVAP canister purge tube to the EVAP canister purge solenoid valve.
10. Connect the EVAP canister purge tube to the connection at the rear of the right head (1).
11. Connect the EVAP canister purge tube to the fuel feed pipe.
12. Connect the EVAP canister purge tube to the intake manifold.
13. Connect the EVAP canister purge tube to the EVAP canister purge solenoid valve.
14. Connect the ignition coil wire harness main electrical connector.
15. Install the spark plug wires to the ignition coils.