CTS V8-5.7L VIN P (2004)
5. Install the lower engine mount bracket retaining bolts.
Tighten the nut to 80 Nm (59 ft. lbs.).
6. Install the lower engine mount bracket retaining nut.
Tighten the nut to 80 Nm (59 ft. lbs.).
7. Remove the screw jack.
8. Lower the vehicle.
Right
Engine Mount Bracket Replacement - Right
Removal Procedure
1. Raise and support the vehicle.
2. Remove the starter.
3. Install a screw jack with a block of wood under the oil pan for support.
4. Remove the engine mount bracket to engine retaining bolts.