CTS V8-5.7L VIN P (2004)
2. Install intake manifold.
3. Position the intake manifold forward.
4. Connect the MAP sensor vacuum hose.
5. Connect the MAP sensor electrical connector.
6. Position the intake manifold into place.
7. Apply thread-lock GM P/N 12345382 (Canadian P/N 10953489), or equivalent to the threads of the intake manifold bolts (1).
8. Caution: Refer to Fuel Rail Stop Bracket Installation Caution in Service Precautions.
Install the fuel rail stop bracket (2).
9. Install the intake manifold bolts (1).
10. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the intake manifold bolts.
1. Tighten the intake manifold bolts a first pass in sequence to 5 Nm (44 inch lbs.).
2. Tighten the intake manifold bolts a second pass in sequence to 10 Nm (89 inch lbs.).
