CTS V8-5.7L VIN P (2004)
2. Position hazard switch wire harness (1) in the harness retainers.
3. Push the wire service loop forward between the duct as the vent is positioned on the I/P.
4. Overlap the vent housing over the duct.
5. Position the vent into the I/P.
IMPORTANT: Ensure that the wire harness is not interfering with the moving parts of the vent.
6. Push the vent in to the I/P in order to seat the retainers.
Deflector Replacement - Instrument Panel Air-Left
DEFLECTOR REPLACEMENT - INSTRUMENT PANEL AIR - LEFT
REMOVAL PROCEDURE
1. Using a small flat bladed tool, insert between the air vent and the I/P retainer.
2. Pry out in order to release the retainer securing the air vent.
INSTALLATION PROCEDURE