CTS V8-5.7L VIN P (2004)
Tighten the bolts to 3.9 N.m (35 lb in).
4. Lubricate the O-ring with refrigerant oil before installing the hose.
5. Connect the condenser tube to the condenser.
6. Install the condenser tube bolt (1).
Tighten
Tighten the bolt to 5.4 N.m (48 lb in).
7. Lube the O-ring with refrigerant oil before installing hose.
8. Connect the discharge hose to the condenser.
9. Connect the discharge hose bolt (1) to the condenser.
Tighten
Tighten the bolt to 5.4 N.m (48 lb in).
10. Ensure that side seals are not damaged and in position around pipes.