CTS V8-5.7L VIN P (2004)
17. Remove the headlamp bulb cover from the headlamp assembly.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
18. Remove the headlamp bulb from the headlamp assembly.
INSTALLATION PROCEDURE
1. Install the bulb to the headlamp assembly.
2. Install the headlamp bulb cover to the headlamp assembly.
3. Install the headlamp assembly.
4. Pull the top of the front fascia and grille forward to install the headlamp to the vehicle.
5. Install the headlamp assembly to the vehicle.
6. Reach behind the headlamp assembly to connect the headlamp electrical connectors.
IMPORTANT: It will take a high amount of force to perform the next step.
7. Press headlamp assembly rearward to engage the headlamp ball stud (1) into the fender socket.
NOTE: Refer to Fastener Notice in Service Precautions.
8. Install the 3 bolts to secure the headlamp to the vehicle.
Tighten
Tighten the bolts to 6 N.m (53 lb in).