CTS V8-5.7L VIN P (2004)
Wheel Hub: Service and Repair
Rear
Wheel Bearing/Hub Replacement - Rear
^
Tools Required
-
J 45859 Axle Remover, or equivalent
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the rear brake rotor.
4. Remove and discard the wheel drive shaft nut.
5. Disconnect the ABS sensor electrical connector.
6. Disconnect the ABS sensor electrical connector from the backing plate.
7. Remove the parking brake cable bracket mounting bolts from the knuckle.
8. Remove the parking brake cable bracket from the knuckle.