CTS V8-5.7L VIN P (2004)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Replacement
CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the starter.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
IMPORTANT: Clean the area around the CKP before removal in order to avoid debris from entering the engine.
5. Remove the CKP sensor retaining bolt.
6. Remove the CKP sensor.
INSTALLATION PROCEDURE