CTS V8-5.7L VIN P (2004)
Maintenance Indicator - A/T: Service and Repair
HOW TO RESET THE CHANGE TRANSMISSION FLUID MESSAGE AND THE TRANSMISSION FLUID INDICATOR (AUTOMATIC
TRANSMISSION)
After the transmission fluid has been changed, the "Change Trans Fluid" message and the transmission fluid life indicator must be reset. To reset the
message and indicator, use one of the following procedures:
BASE AUDIO SYSTEM
Press the "CLR" button located to the right of the DIC display to acknowledge the "CHANGE TRANS FLUID" message. This will clear the message
from the display and reset it.
To reset the transmission fluid life indicator, use the following steps:
1. Press the up or down arrow on the "INFO" button located to the right of the DIC display to access the DIC menu.
2. Once the "XXX% TRANS FLUID LIFE' menu item is highlighted, press and hold the "CLR" button. The percentage will return to 100, and
the transmission fluid life indicator will be reset.
3. Repeat the steps if the percentage does not return to 100.
NAVIGATION SYSTEM
1. Press the multi-function button located to the right of the DIC display, next to the OK prompt to acknowledge the "Change Trans Fluid" message.
This will clear the message from the display and reset it.
To reset the transmission fluid life indicator, use the following steps:
1. Turn the system on by pressing the "PWR/VOL" knob once. The "PWR/VOL" knob is located to the lower left of the DIC display.
2. Press the "INFO" button located to the left of the DIC display to access the Vehicle Info (Information) menu.
3. Turn the "TUNE/SEL" knob located to the lower right of the DIC display until "Trans Fluid Life" is highlighted. Press the knob once to select
it.
4. Once XXX% Trans Fluid Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display.
The percentage will return to 100, and the transmission fluid life indicator will be reset.
5. Repeat the steps if the percentage does not return to 100.