CTS V8-5.7L VIN P (2004)
18. Remove both CPA locks from the driver/LF side impact module and seat belt pretensioner yellow connector (1) located under the front of driver
seat.
19. Disconnect the LF side impact module and pretensioner yellow connector from the vehicle harness yellow connector (1).
20. Remove the left rear sail panel.
21. Remove the CPA (3) from the left/driver roof rail module yellow connector (2).
22. Disconnect the left roof rail module yellow connector (1) from the vehicle harness yellow connector (2).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow connector (1) to the vehicle harness yellow connector (3).
3. Install the CPA to the steering wheel module coil yellow connector (1).
4. Install the driver/left sound insulator to the instrument Panel (I/P) (2).