CTS V8-5.7L VIN P (2004)
Side Air Bag: Service and Repair
Side Impact Module Wiring Harness Replacement
INFLATABLE RESTRAINT SIDE IMPACT MODULE WIRING HARNESS REPLACEMENT
REMOVAL PROCEDURE
CAUTION:
-
Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
-
Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 for driver's seat or SIR Disabling and Enabling Zone 9 for passenger seat.
IMPORTANT: Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.
2. Remove the inflatable restraint side impact module (2) from the seat (1). With the seat back panel removed, the inflatable restraint side impact
module wiring harness (3) will be exposed.
3. Remove the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
INSTALLATION PROCEDURE
1. Install the new side impact module wiring harness (3) to the seat (1).
2. Install the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
3. Install the side impact module (2) to the seat (1).
4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 for driver's seat or SIR Disabling and Enabling Zone 9 for passenger seat.