CTS V8-5.7L VIN P (2004)
2. Install the bolt (1) securing the battery negative cable to the engine block.
Tighten
Tighten the battery negative cable to engine block bolt to 25 N.m (18 lb ft).
3. Connect the instrument panel harness connector (3) to the battery negative cable.
4. Install the bolt (1) securing the battery negative cable to the side rail.
Tighten
Tighten the battery negative cable to side rail bolt to 36 N.m (27 lb ft).
5. Connect the cable retaining clip to the stud on the shock tower.
6. Install the battery tray and battery.
7. Install the fuel injector sight shield.