CTS V8-5.7L VIN P (2004)
5. Remove the nut (1) securing the battery positive cable (2) to the underhood fuse block.
6. Disconnect the cable retaining clip from the stud.
7. Remove the transmission.
8. Remove the positive battery cable from the starter motor.
9. Remove the positive battery cable from the retaining features on the clutch housing mounting bolts.
10. Remove the left front wheelhouse liner.
11. Remove the positive battery cable from the retaining features on the engine block.
12. Pull back the rubber boot and remove the generator output BAT terminal nut.
13. Remove the positive battery cable from the vehicle.
INSTALLATION PROCEDURE