CTS V8-5.7L VIN P (2004)
Alternator: Service and Repair
Generator Replacement
GENERATOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the battery negative cable.
2. Remove the air cleaner assembly.
3. Remove the radiator fan assembly.
4. Remove the accessory drive belt (3).
5. Remove the bolt securing the power steering pressure hose bracket to the generator.
6. Remove the rear generator mounting bolt (1).
7. Remove the front generator mounting bolts (2,3).
8. Lift the generator off of the mounting bracket in order to gain access to the connector and the generator output BAT terminal nut.
9. Disconnect the wire harness electrical connector from the generator.
10. Reposition the protective boot from the generator output battery terminal for access.
11. Remove the generator output battery terminal nut and disconnect the battery positive lead from the generator.
12. Remove the generator from the vehicle.
INSTALLATION PROCEDURE
1. Position the generator near the installed position.
NOTE: Refer to Fastener Notice in Service Precautions.