CTS V8-5.7L VIN P (2004)
6. Important: Apply thread-locker 242 or equivalent to the threads of the stabilizer shaft link.
Connect the stabilizer shaft link to the lower control arm.
7. Install the stabilizer shaft link retaining nut.
Tighten the nut to 50 Nm (37 ft. lbs.).
8. Connect the outer tie rod to the steering knuckle.
9. Install the outer tie rod retaining nut.
Tighten the nut to 75 Nm (55 ft. lbs.).
10. Install the wheel bearing/hub.
11. Install the tire and wheel.
12. Lower the vehicle.