CTS V8-5.7L VIN P (2004)
3. Notice: Refer to Fastener Notice in Service Precautions.
Using the open-end crowfoot that comes in the kit, install the power steering gear solenoid/actuator in the steering gear.
Tighten the solenoid to 18 Nm (14 ft. lbs.).
4. Connect the power steering gear solenoid/actuator wiring harness.
5. Install the power steering gear solenoid/actuator wiring harness to the 2 plastic wiring harness retainers.
6. Install the front air deflector .
7. Install the front tire and wheel.
8. Fill and bleed the power steering system.
9. Lower the vehicle