CTS V8-5.7L VIN P (2004)
7. Install the outer tie rod end to the steering knuckles.
8. Install the outer tie rods nut.
Tighten the nuts to 70 Nm (52 ft. lbs.).
9. Connect the intermediate shaft to the power steering gear.
10. Install the intermediate shaft lower pinch bolt.
Tighten the bolt to 47 Nm (35 ft. lbs.).
11. Install the front air deflector.
12. Install the tire and wheels.
13. Lower the vehicle.
14. Remove J 42640 from the steering column.
15. Bleed the power steering system.
16. Adjust the front toe.
RHD
Power Steering Gear Replacement (RHD)
^
Tools Required
-
J 24319-B Steering Linkage and Tie Rod Puller
-
J 42640Steering Column Anti-Rotation Pin
Removal Procedure
1. Install J 42640 to the steering column.