CTS V8-5.7L VIN P (2004)
12. Remove the power steering gear pressure and return hoses from the power steering gear.
13. Remove the power steering return hose retaining bolt from the power steering gear.
14. Remove the power steering gear mounting bolts.
15. Remove the power steering gear through the right wheel opening.
16. Transfer the outer tie rods if replacing the power steering gear.
Installation Procedure
1. Install the power steering gear through the left wheel opening.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the power steering gear mounting bolts.
Tighten the power steering gear mounting bolts to 95 Nm (70 ft. lbs.).