CTS V8-5.7L VIN P (2004)
![background image](/cadillac/cts/v8-5.7l_vin_p/Page-2067001.png)
Stabilizer Bushing: Service and Repair
Rear Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the stabilizer shaft mounting bolts.
3. Remove the stabilizer shaft bracket.
4. Remove the stabilizer shaft insulator from the stabilizer shaft.
Installation Procedure
1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing rearward.
2. Install the stabilizer shaft bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the stabilizer shaft bracket mounting bolts.
Tighten the bolts to 60 Nm (44 ft. lbs.).
4. Lower the vehicle.