CTS V8-5.7L VIN P (2004)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock, Shock Component, and/or Spring Replacement
Shock, Shock Component, and/or Spring Replacement
Removal Procedure
1. Notice: Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in
premature failure of the coil springs.
Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the shock module from the vehicle.
4. Install the shock module into the spring compressor.
5. Mark the upper control arm assembly and insulator for proper installation.
6. Important: The spring is compressed when the shock absorber moves freely.
Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
7. Remove the shock absorber upper retaining nut.
8. Remove the shock absorber from the shock module.
9. Loosen the compressor forcing screw until the upper mounting plate and coil spring may be removed.
10. Remove the upper control arm bracket assembly, insulator and coil spring from the spring compressor.