CTS V8-5.7L VIN P (2004)
direction of forward tire rotation prior to installation on the vehicle.
2. Clean the threads on the wheel studs and wheel nuts.
3. Align the reference mark and install the tire and wheel assembly to the hub.
4. Install the wheel nuts.
5. Using the J 39544-KIT, tighten the wheel nuts in the appropriate sequence shown.
Tighten the nuts in sequence to 140 Nm (100 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
Important: Tighten the nuts evenly and alternately in order to avoid excessive runout of the tire and wheel assembly.
6. Install the wheel nut caps, if equipped.
7. Install the wheel center cap, if equipped.
8. Lower the vehicle.