CTS V8-5.7L VIN P (2004)
Pressure Plate: Technical Service Bulletins
M/T - Clutch Pressure Plate Wear Indicator Adjustment
Bulletin No.: 04-07-31-005
Date: August 19, 2004
INFORMATION
Subject:
Clutch Pressure Plate Wear Indicator Adjustment
Models:
2004 Cadillac CTS, CTS-V
1997-2004 Chevrolet Corvette
1998-2002 Chevrolet Camaro
1998-2002 Pontiac Firebird
2004 Pontiac GTO
with Manual Transmission and LUK Clutch
During the shipment of a service clutch assembly, it is possible for the pressure plate wear indicator adjuster to shift from the "new" position. If the
clutch adjusting ring steps are not adjusted fully out, improper clutch operation may result. The clutch may not release completely or may bind when
pedal pressure is applied causing the hydraulic line to blow off.
Dealer technicians need to be reminded that a thorough inspection of a service clutch is necessary prior to installation. The wear indicator needs to be in
the "new" position with the adjusting ring steps fully out.
If a readjustment is required, it must be accomplished Off-Vehicle by mounting the pressure plate in a press.
For Corvette models, this procedure can also be accomplished On-Vehicle (with the aid of an assistant) by removing the flywheel inspection cover.
Important:
The correct torque specification for the six clutch pressure plate to flywheel bolts is 70 N.m (51 lb ft).
Disclaimer