CTS V8-5.7L VIN P (2004)
Wiper Motor: Service and Repair
Wiper Motor Module Replacement (RHD)
WIPER MOTOR MODULE REPLACEMENT (RHD)
REMOVAL PROCEDURE
1. Remove the wiper motor mini 10A and 30A fuses. The wiper motor fuses are located in the underhood fuse block.
2. Remove the wiper arm assemblies.
3. Remove the air inlet grille (1,3).
4. Remove the wiper motor module mounting bolts (3,5).
5. Disconnect the wiper motor electrical connector (4).
6. Remove the wiper motor module (1) from the vehicle.
INSTALLATION PROCEDURE