CTS V8-5.7L VIN S (2005)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator - Right (LHD)
AIR TEMPERATURE ACTUATOR REPLACEMENT - RIGHT (LHD)
REMOVAL PROCEDURE
1. Remove the air inlet assembly.
2. Remove the right air temperature actuator screws (1).
3. Remove the right air temperature actuator.
4. Disconnect the right air temperature actuator electrical connector.
INSTALLATION PROCEDURE
1. Connect the right air temperature actuator electrical connector.
2. Install the right air temperature actuator.
3. Install the right air temperature actuator screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1 N.m (9 lb in).
4. Install the air inlet assembly.