CTS V8-5.7L VIN S (2005)
Shift Solenoid Position Sensor/Switch: Service and Repair
Manual Shaft Shift Position Switch Replacement
^
Tools Required
-
J 44767 Seal Installer.
Removal Procedure
1. Raise and support the vehicle.
2. Remove the transmission manual shift shaft nut.
3. Disconnect the shift linkage from the transmission manual shift shaft.
4. Remove the exhaust system.
5. Disconnect the propeller shaft coupler (1) from the transmission flange.
6. Push the front propeller shaft toward the rear of the vehicle in order to release the propeller shaft coupler (1) from the transmission flange.
7. Secure the front propeller shaft (1) to the shift control lever (3) with a piece of mechanics wire (2).