CTS V8-5.7L VIN S (2005)
Headlamp Washer Spray Nozzle: Service and Repair
Headlamp Washer Nozzle Assembly Replacement (With RPO Code CE4, TT6)
HEADLAMP WASHER NOZZLE ASSEMBLY REPLACEMENT (WITH RPO CODE CE4, TT6)
REMOVAL PROCEDURE
1. Remove the front bumper fascia (3).
2. Depress the tab (2) on the headlamp washer hose connection, in order to disconnect the headlamp washer hose (1).
3. Disconnect the hose from the retainer on the headlamp.
4. Remove the 2 screws (4) from the washer nozzle bracket.
5. Remove the headlamp washer nozzle assembly (2) from the headlamp housing.
INSTALLATION PROCEDURE
1. Install the headlamp washer nozzle assembly (2) to the headlamp housing.
2. Install the 2 screws (4) that retain the headlamp washer nozzle (2) to the headlamp housing.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws (4) to 1.5 N.m (13 lb in).