CTS V8-6.0L (2007)
Notice: Refer to Fastener Notice.
3. Install the 2 brake caliper bracket bolts (2).
Tighten the front brake caliper bracket bolts to 130 N.m (96 lb ft).
Important:
*
Ensure that the caliper guide pin boots (2) are fully seated to the caliper guide pin retaining seat (3) of the caliper guide pin.
*
Ensure that the caliper guide pin boots (2) are fully seated to the caliper boot seal retaining seat (1) of the brake caliper mounting
bracket.
Install the caliper guide pin boots (2) to the brake caliper mounting bracket retaining seat (1).
4. Install the caliper guide pins (1) to the caliper mounting bracket (3).
Ensure the caliper guide pin retaining seat is fully seated to the caliper pin boot (2).
5. Carefully pull outward on the caliper guide pin (3) to ensure that the caliper guide pin retaining seat is fully seated to the caliper guide pin boot
(2).