CTS V8-6.0L (2007)
Radiator Hose: Service and Repair
Radiator Inlet Hose Replacement
Radiator Inlet Hose Replacement (LS2)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Partially drain the cooling system. Refer to Draining and Filling Cooling System (GE 47716) Draining and Filling Cooling System (LP1, LY7
Static Fill) Draining and Filling Cooling System (LS2 Static Fill).
2. Position J 38185 to the clamp in order to remove the inlet hose from the radiator.
3. Position J 38185 to the clamp in order to remove the hose (1) from the engine.
4. Remove the inlet hose.
Installation Procedure