CTS RWD V6-3.6L (2008)
Caution
DO NOT drag the display on the work table. Dragging the display on the work table may cause the rubber pad (1) to come off.
3. Move the display to a suitable work table.
4. Using care, manually move the display from the lower position (1) to the upper most position (2).
5. Use the recommended brush shown above to apply lubricant in the following step. For best application of the lubricant, use a brush that has
bristles 3-5 mm (0.125-0.2 in) wide and 10 mm (0.394 in) long.
