CTS RWD V6-3.6L (2008)
Tighten the bolts to 225 N.m (166 lb ft).
4. Install the outer brake pad springs (1).
5. Install the inner brake pad springs (2).
6. Install the outer brake pad (1).
7. Install the inner brake pad (2).
Important: If reusing the caliper bracket bolts the threads of the caliper bracket bolts and the threads of the knuckle mounting holes
must be free of residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
8. Prepare the bolts and the threaded holes for assembly:
*
Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the threaded holes by using denatured alcohol or equivalent and allow to dry.
*
Apply threadlocker GM P/N 12345493 (Canada P/N 10953488), or equivalent to 2/3 of the threaded length of the lower caliper bracket bolts.
