CTS RWD V6-3.6L (2008)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Right Side
Air Temperature Actuator Replacement - Right Side
Removal Procedure
1. Remove the blower motor control module. Refer to Blower Motor Control Module Replacement (See: Control Module HVAC/Service and
Repair/Blower Motor Control Module Replacement) .
2. Remove the right air temperature actuator screws (1).
3. Remove the right air temperature actuator.
4. Disconnect the right air temperature actuator electrical connector.
Installation Procedure
1. Connect the right air temperature actuator electrical connector.
2. Install the right air temperature actuator.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the right air temperature actuator screws (1).
Tighten the screws to 1 N.m (9 lb in).